| Traction, rope pressure, rope safety |
| Traction empty,on top, accelerating |
| 1.9275 <= 1.9523 |
| Traction 150% nominal load, below, not moving |
| 1.6294 <= 1.9523 |
| Rope pressure k < permissible rope pressure |
| 1.90 < 2.00 N/mm² |
| Conditions according to EN81: |
| Load 125% | 1.4768 <= 2.1030 |
| Emergency stop | 1.6291 <= 1.7562 |
| with deceleration [m/s²] 0.500 |
| Blocked car | 06.693 > 4.4226 |
| Real safety factor > Minimum safety factor for ropes (dfactor = 1.00) |
| 21.06 > 12 |
| Rope safety factor according to EN81: (0) |
| Pulleys >= 320 mm, pulleys NPR = 0 NPS = 2 |
| Rope safety nue = 21.1 > 16.4 (minSF) |
| Rope certification EN81 |
| Traction conditions are fulfilled. |
| Rope safety conditions are fulfilled. |
|
|---|
| ZAlift - 20231212 - Machine dimensioning ZLW-24697 |
| Mechanical drive data |
| Machine manufactured by | Ziehl-Abegg |
| Machine type | SM 210.70B |
| Machine version ZAtop | Gearless synchronous |
| Traction sheave | 320/150/14.0/10x8/HK50 |
| Permissible load output torque | 965 Nm (max. 1150) |
| Real statical axle load | 3685 kg (max. 4500) |
| Rope pull admissible only in direction of motor foot! |
| Brake data |
| brake Mayr ROBA-twinstop RTW1000, 2x1200 Nm, EU-BD 1014/1 |
| Dual circuit disc brake, DC supply necessary |
| (797 Nm, 0.65 m/s², 3.61 m, 39113 J, 316 W) |
| 207 V brake, with hand release, microswitch |
| - |
| Machine load data in the installation |
| Typical motor operating power | 15.6 kW |
| Typ. operating current 49.3 A, Start. Current 81.4 A at acceleration 0.8 m/s² |
| Start. Current | 89.6 A at acceleration1m/s² |
| Start. Current | 77.3 A at acceleration 0.7 m/s² |
| Average power losses | 2.84 kW |
| Output speed | 191 rpm |
| Load torque | 965.8 Nm(eff. 777.7) |
| Inertia of installation | 49.16 kgm² |
| 240 Starts per hour , 50 % required duty cycle at elevator operation |
| Max. static load pulleys 31173 N, pulley speed 1.60 m/s |